Seat Rail Cover, Removing And Installing, Front And Rear: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat into its highest position.
-- Front cover: pry off the spindle cover -1- from the seat rail cover -2- and the forward/back adjustment spindle using a flat-head screwdriver or the Trim Removal Wedge :3409 .
Fig 1: Prying Cover Caps From Seat Rail Covers And Seat Fore/Aft Adjustment Spindle With Trim Removal Wedge 3409
-- Lift the inner side of the cover -1- slightly away from the seat rail -arrow A- by hand or using a flat-head screwdriver and remove the cover toward the front -arrow B-.