Seat Functions Control Module, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition.

-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .

Standard/Sport/Super Sport Seat:

Fig 1: Memory Seat/Steering Column Adjustment Control Module -J136-

Courtesy of AUDI OF AMERICA, LLC

-- Open the tabs -arrows-.

-- Remove the control module -1- from the bracket.

-- Release the connector safety catch and disconnect the connectors -2-.

Comfort Seat:

Courtesy of AUDI OF AMERICA, LLC

-- Release the retaining tabs -arrows-.

-- Remove the control module -1- from the bracket.

-- Release the connector safety catch and disconnect the connectors -2-.