Headrest, Removing And Installing: Removing
-- Move the front seat forward into the lowest position and tilt backrests approximately 45°.
-- Move the headrest all the way up.
-- Press the release button -4- on the left headrest guide -arrow A- and at the same time press together the collar -1- on the release ring -3- -arrow B-.
-- Hold the release ring pressed and remove the headrest -2- upward from the catch.
TIP:
If the headrest does not release, proceed as follows:
-- Unclip the left collar -1- using the spatula -arrow- and slide it upward.
-- Position the spatula on the release ring -2- on the left headrest guide.
-- Press the release button -3- forward by hand or using a flat-head screwdriver -arrow A- while pressing the release ring down with the spatula -arrow B-.
-- Press and hold the release ring with the spatula and remove the headrest -1- upward from the retainer.
TIP:
The headrest can only be removed with difficulty.