LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (Exterior Equipment) >> 66 Exterior Equipment >> Name Badges And Emblems >> Radiator Grille Name Badges And Emblems, Removing And Installing >> Emblem, Removing

Emblem, Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- A6 and A7 Sportback if equipped, remove the peripheral camera mount. Refer to Front Peripheral Camera -R243-, REMOVING AND INSTALLING .

-- RS6, RS7 Sportback: remove the peripheral camera mount. Refer to Front Peripheral Camera -R243-, REMOVING AND INSTALLING .

-- If equipped, remove the peripheral camera mount. Refer to Front Peripheral Camera -R243-, REMOVING AND INSTALLING .

-- Release the retainers -1- at the shown points -arrows-.

GWWA66-12001Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover -2-.

-- Release the tab -1- at the areas marked with -arrows- by lifting each securing tab -2-.

GWWA66-11918Courtesy of AUDI OF AMERICA, LLC

-- Remove the emblem from the radiator grille -3-.

Installing

Install in the reverse order of removal while noting the following:

-- Press on the emblem until it audibly engages.