Rear Window, Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Pay attention to the repair information. Refer to REPAIR INFORMATION .
To complete the Procedure , a second technician is required to be at the following position. Refer to REAR WINDOW, INSTALLING => Insert the rear window into the window opening using suction lifters. .
Required Tools and Materials for Removal and Installation. Refer to REQUIRED TOOLS AND MATERIALS FOR REMOVAL AND INSTALLATION .

Procedure

-- Prepare the body flange for installation. Refer to BODY FLANGE, PREPARING FOR INSTALLATION .

-- Prepare undamaged window for installation. Refer to UNDAMAGED WINDOW GLASS, PREPARING FOR INSTALLATION , or prepare new window for installation. Refer to NEW WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Insert the rear window into the window opening using suction lifters.

-- Center the window glass at the sides.

Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .

Install in reverse order of removal. Note the following:

TIP:

After connecting the wires or antenna wires, there may be additional wires for other optional equipment. Cut off these unnecessary wire ends at their connection base.