ELECTRICAL COMPRESSOR WITH Electric Compressor Control Module -J1123-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
- Check the vacuum hoses for damage before the assembly and replace if necessary.
CAUTION:
The electrical compressor can be damaged if the vacuum hose is loose, damaged, or blocked.
- Check the vacuum hose for the electrical compressor for damage and correct routing.
-- Install the left engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .
-- Install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING, 2.9L ENGINE .
-- Install the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .
-- Follow all steps after connecting the battery. Refer to BATTERY A, DISCONNECTING AND CONNECTING, VEHICLES WITH HIGH-VOLTAGE SYSTEM, (0K3) .