Lower Air Duct Pipe, Removing And Installing, 2.9L Engine: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replacing the seals after removal.
- Replace bolts that were tightened with an additional turn after removing them.
-- If removed, install the Charge Air Cooler Temperature Sensor 1 -G763- and Charge Air Cooler Temperature Sensor 2 -G764-. Refer to CHARGE AIR TEMPERATURE SENSOR, REMOVING AND INSTALLING .
-- If removed, install the front coolant pipe. Refer to FRONT COOLANT PIPE, REMOVING AND INSTALLING, 2.9L ENGINE .
-- If removed, install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- If removed, install the upper air duct pipe. Refer to UPPER AIR DUCT PIPE, REMOVING AND INSTALLING, 2.9L ENGINE .
-- If removed, install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING, 2.9L ENGINE .