LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Crankshaft, Cylinder Block (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> Electrical Compressor Bracket, Removing And Installing >> Removing

Electrical Compressor Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the electrical compressor. Refer to ELECTRICAL COMPRESSOR WITH Electric Compressor Control Module -J1123-, REMOVING AND INSTALLING .

-- Remove the bolts -1 and 2- and remove the bracket -3- for the electrical compressor.

Fig 1: Electrical Compressor Bracket - Tightening Specification and Sequence
GWWA13-11372Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals