A/C Compressor Ribbed Belt, Removing And Installing, 2.9L Engine With Radiator Removed: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
-- Position the ribbed belt. Refer to OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE .
-- Pivot the ribbed belt tensioner using the Torx Socket - T60: 40087 slightly clockwise and remove the Locking Pin: T10060A .
-- To tension the ribbed belt release the tensioner.
-- Check whether the ribbed belt is routed correctly.
-- Start the engine and check the ribbed belt routing.