Charge Air Cooling Circuit Cooler, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- If there are small impressions on the slats. Refer to appropriate Service Information .
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
- Used coolant cannot be used again.
-- Install the bumper cover end plate and the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .
-- Fill with coolant. Refer to Coolant, Filling .