Small Right Rear Coolant Pipe, Removing And Installing, 3.0L Engine: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Replace the O-ring after removal.
Used coolant cannot be used again.

-- Coat the new O-ring with coolant.

-- Connect the coolant hose to the connector coupling. Refer to Figure.

-- Install the heat shield and engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Fill the coolant. Refer to Coolant, Filling .