Right Coolant Pipe On Engine, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right front wheel.
-- Remove the right front wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the right subframe shield. Refer to appropriate Service Information .
-- Remove the right drive axle heat shield. Refer to appropriate Service Information .
-- Remove the right drive axle from the transmission. Refer to appropriate Service Information .
-- Place the Shop Crane - Drip Tray:VAS6208 underneath.
-- Remove the bolt -2-.
-- Loosen the hose clamps -1 and 4- and remove the right coolant pipe -3-. (Shown with subframe removed.)