Large Right Rear Coolant Pipe, Removing And Installing, 2.9L Engine: Installing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Replace the O-rings after removing them.
Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
Used coolant cannot be used again.

-- Coat the new O-rings with coolant.

-- Install the right catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING, 2.9L ENGINE WITHOUT PARTICULATE FILTER .

-- Fill the coolant. Refer to Coolant, Filling .