Front Coolant Pipe, Removing And Installing, 3.0L Engine: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the upper air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .
-- Remove the starter generator ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Position the Counterhold - Multiple Use:T10172A with the Counterhold - Kit - Adapter 10:T10172/10 on the coolant pump belt pulley -1- and remove the bolts -2-.
-- Remove the belt pulley.
-- Remove the bolts -arrows- and remove the front coolant pipe -1- from the right cylinder head and from the shut-off valve.