LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 297 (Crankshaft, Cylinder Block (Servicing - 6-Cylinder 2.9L; 3.0L 4V TFSI Ea839 Engine)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> Starter Generator Bracket, Removing And Installing >> Removing

Starter Generator Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the starter generator. Refer to OVERVIEW - GENERATOR, VEHICLES WITH 2.9L/3.0L TFSI ENGINE .

-- Remove the bolts -arrows- and the bracket -1-.

Fig 1: Starter Generator Bracket -1- - Tightening Specifications and Tightening Sequence
GWWA13-11294Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals