LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 291 (Wiring) >> 97 Wiring >> Relay Panels, Fuse Panels And E-Boxes >> Terminal 40 Wire Junction TV66, Removing And Installing >> Removing

Terminal 40 Wire Junction TV66, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the battery. Refer to Battery A, Disconnecting and Connecting .

A6, A7 Sportback

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING or AIR FILTER HOUSING, REMOVING AND INSTALLING .

Continuation for all vehicles

RS 6 Avant, RS 7 Sportback with parking/auxiliary heater:

-- Disconnect the connectors -2- and free up the wire.

GWWA82-10430Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- using the Socket:T40078  .

-- Remove the parking/auxiliary heater -3- from the rubber bushing -1- and slightly push to the left.

Continuation for all vehicles

-- Release the catch -6-.

GWWA97-13487Courtesy of AUDI OF AMERICA, LLC

-- Open the cover -1- -arrow-.

-- Remove the nuts -3- and -4-, and free up the wires.

-- Remove the bolts -2- and -5-.

-- Remove the Terminal 40 Wire Junction -TV66-.