Engine, Removing From Scissor Lift Table, 2.9L Engine

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Lifting Tackle:3033

Fig 1: Lifting Tackle (3033)
Courtesy of AUDI OF AMERICA, LLC
Shop Crane:VAS6100

Fig 2: Identifying Shop Crane
Courtesy of AUDI OF AMERICA, LLC
Lift Arm Extension:VAS6101

Fig 3: Identifying Lift Arm Ext./Workshop Hoist VAS 6101
Courtesy of AUDI OF AMERICA, LLC

Procedure

Engine/transmission assembly removed and separated on Scissor Lift Table:VAS6131B . Refer to ENGINE AND TRANSMISSION, SEPARATING, 2.9L ENGINE .

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of injury due to the engine weight shifting.

The possibility for parts of the body to be pinched or crushed increases.

- Transport the engine only without the transmission using the method described.

-- Attach the Lift Arm Extension:VAS6101 to the Shop Crane:VAS6100 .

-- Engage the Lifting Tackle: 3033 as shown in the engine lifting eyes and on the shop crane.

-- Pry up the engine with the workshop crane.