Right Engine Mount, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace bolts that were tightened with an additional turn after removing them.
-- Install the starter generator. Refer to GENERATOR, REMOVING AND INSTALLING, VEHICLES WITH 3.0L TFSI ENGINE .
-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Remove the engine support bridge. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .