Vehicle Diagnostic Tester, Connecting
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of injury due to unintended engine start on high-voltage vehicles!
- Pay attention to the high-voltage system warning messages:
- For procedures where the ignition must be switched off, refer to PROCEDURES THAT NEED IGNITION SWITCHED ON .
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Diagnostic Interface:VAS 6154A
Procedure :
-- Attach the connector of the Vehicle Diagnostic Tester:VAS 6160 A to the diagnostic connection in the vehicle.
-- Turn on the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Follow the screen menu to start the desired function.