Center Bumper Trim Molding, Removing And Installing, A6 ALLROAD: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lower section of the bumper cover. Refer to BUMPER COVER LOWER SECTION, REMOVING AND INSTALLING, A6 ALLROAD .
-- Remove the large and small reflector. Refer to REFLECTOR, REMOVING AND INSTALLING, A6 .
-- Release the retainers -1- and remove the trim molding -3- from the bumper cover -2-.