Bumper Cover Mount, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Free up the connector if equipped.
-- Remove the nuts -1-.
-- Tilt the rear bumper cover mount -2- downward -arrow- ; this will loosen the catch -3-.
-- Disengage the front mount bracket -4- on the fender.