Air Intake Manifold From Heater And A/C Unit, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .
-- Remove the acoustic cover and insulation from the air intake housing -C-. Refer to OVERVIEW - HEATER AND A/C UNIT .
-- Mark the connector and the adjustment motors on the air intake housing and remove. Refer to OVERVIEW - ACTUATORS ON AIR INTAKE HOUSING .
-- Mark the routing of the wiring harness -A- on the air intake housing -C- (or take a picture) and remove from the air intake housing. Refer to OVERVIEW - HEATER AND A/C UNIT .
-- Remove the bolts -B-.
-- Disconnect the air intake housing -C- from the heater and A/C unit evaporator housing -D-. Refer to OVERVIEW - HEATER AND A/C UNIT .