Rear Display And Control Head, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

• If the Rear A/C Display Control Head - E265- is replaced, perform the test plan to replace the Rear A/C Display Control Head -E265-. Refer to Vehicle Diagnostic Tester.

Procedure 

-- Connect the Vehicle Diagnostic Tester.

-- Select the Diagnostic  mode and start the diagnosis.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• Diagnostic-capable systems
• 0009 - Electronic central electric - J519
• 0009 - Electronic central electric, functions
• 0009 - E265 - Rear A/C Display Control Head
• → Replace control module