Fragrance System Hoses, Removing And Installing: Removing
-- Remove the driver side storage compartment. Refer to OVERVIEW - INSTRUMENT PANEL COVER, DRIVER SIDE .
Hose to the Driver Side Air Duct:
-- Remove the hose -C- from the connector coupling -A- by pushing the pull release -B- into the connector coupling -arrow-.
Hose to Air Freshening System Control Module -J1101- with Fragrance Diffuser System Blower -V686- :
-- Remove the hose -D- from the connector coupling -A- by pushing the pull release -B- into the connector coupling -arrow-.
-- Guide out the hose carefully and remove.
Hose to the Front Passenger Side Air Duct:
-- Remove the instrument panel. Refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .
-- Remove the footwell vent on the front passenger side. Refer to FRONT PASSENGER SIDE FOOTWELL VENT, REMOVING AND INSTALLING .
-- Equipped on some models: remove the windshield projection head up display control module. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
-- Remove the expanding rivet -B-, free up the air duct -A- and remove.
-- Remove the hose -A- from the connector coupling -C- by pushing the pull release -B- into the connector coupling -arrow-.
-- Guide out the hose carefully and remove.