Fragrance Diffuser System Temperature Sensor -G1056-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch the ignition off.
-- Remove the footwell cover on the driver side. Refer to OVERVIEW - INSTRUMENT PANEL COVER, DRIVER SIDE .
-- Release the Fragrance Container -- -2- in the direction of -arrow- and remove.
-- Remove the connector -3-.
-- Turn the Fragrance Diffuser System Temperature Sensor -G1056- -4- 90° in direction of -arrow- and remove from the Fragrance System Functional Unit -GX43- -1-.