Fragrance Diffuser System Actuator -V687-, REMOVING AND INSTALLING: Installing

Install in the reverse order of removal while noting the following:

-- Check the line -3- for correct routing.

-- If the Fragrance Diffuser System Actuator -V687- -1- is replaced, perform the basic setting.

Procedure 

-- Connect the Vehicle Diagnostic Tester.

-- Select the Diagnostic  mode and start the diagnosis.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• Diagnostic-capable systems
• 0009 - Electronic central electric - J519
• 0009 - Central electric electronic, functions
• 0009 - Basic setting for climate control functions
• → Basic setting 6, program the end stops for Fragrance Diffuser System Actuator -V687-