Vehicle Interior Forced Air Extraction, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the cover on the luggage compartment side trim panel.
-- Move the insulation to the side.
-- Release the retainers -C- and push the forced air extraction ventilation vent frame -A- outward from the body opening -D-.