Debris Grille, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the fresh air intake cover. Refer to FRESH AIR INTAKE COVER, REMOVING AND INSTALLING .
-- Remove the Air Quality Sensor -G238- /Exterior Air Quality and Humidity Sensor -G935- and move to the side (do not disconnect the connector). Refer to Air Quality Sensor -G238- / Exterior Air Quality and Humidity Sensor -G935-, REMOVING AND INSTALLING .
-- Release the straps -arrows-.
-- Remove the debris grille -1- from the air intake shroud -2-.