LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (Air Conditioning (Heating, Ventilation And Air Conditioning - A/C Compressor - Air Ionization))) >> 87 Air Conditioning >> Additional Components For Control And Regulation >> Right Footwell Vent Temperature Sensor -G262-, REMOVING AND INSTALLING >> Removing

Right Footwell Vent Temperature Sensor -G262-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Rotate the vent temperature sensor -2- counter-clockwise and remove from the mount.

Fig 1: Right Footwell Vent Temperature Sensor, Connector And Seal
GWWA87-11010Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.