Ribbed Belt Pulley Without Freewheel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the generator if necessary. Refer to GENERATOR, REMOVING AND INSTALLING, VEHICLES WITH 2.0L TFSI ENGINE / GENERATOR, REMOVING AND INSTALLING, VEHICLES WITH 2.9L TFSI ENGINE / GENERATOR, REMOVING AND INSTALLING, VEHICLES WITH 3.0L TFSI ENGINE .
-- For some engine types the removal can be performed with the generator still installed, here only the ribbed belt must have the tension released and be removed.
-- If present, press the protective cap off the generator pulley.
-- Counterhold nut using :3310 and rotate generator shaft clockwise to loosen it.
-- Remove ribbed belt pulley.