Carbon Brushes, VALEO Generator From 2001, Checking

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Procedure

Fig 1: Carbon Brush Checking, Valeo Generator, From 2001

Courtesy of AUDI OF AMERICA, LLC

-- Remove voltage regulator. Refer to VOLTAGE REGULATOR, VALEO GENERATOR FROM 2001, REMOVING AND INSTALLING .

-- Check the length -a- of the carbon brushes.

Wear limit: -a- = 5 mm.

-- Install the voltage regulator. Refer to VOLTAGE REGULATOR, VALEO GENERATOR FROM 2001, REMOVING AND INSTALLING .