Carbon Brushes, Checking, HITACHI Generator
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
-- Remove the voltage regulator. Refer to VOLTAGE REGULATOR, REMOVING AND INSTALLING - HITACHI GENERATOR .
-- Check the length -a- of the carbon brushes -1-.
- Wear limit: -a- = 6.5 mm.
-- Install the voltage regulator. Refer to VOLTAGE REGULATOR, REMOVING AND INSTALLING - HITACHI GENERATOR .