Camshaft Adjustment Valve 1 -N205- / Exhaust Camshaft Adjustment Valve 1 -N318-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Check the seals for damage and leaks. If necessary, replace the seals, to do so, remove the upper timing chain cover OVERVIEW - TIMING CHAIN COVER => List Item:Upper Timing Chain Cover.
Replace the O-rings and bolts after removing.

-- Oil the O-rings on the sealing surface to the valve for the camshaft adjustment with engine oil.

-- Install the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .