Brake Rotor, Removing And Installing, Ceramic Brakes: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Before reusing ceramic brake rotors check for wear and damage. Refer to BRAKE ROTORS, CHECKING, CERAMIC BRAKES .
- When installing brake rotors, pay attention to the arrow showing the direction of travel and to the left and right installed location.
-- Thoroughly clean the brake rotor and hub contact surfaces and clear them of corrosion.
-- Do not tilt the brake rotor when mounting it on the wheel hub.
-- Tighten the bolt -arrow-.
-- Install the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, TEN-PISTON STEEL AND CERAMIC BRAKE .
CAUTION:
Faulty brakes increase the risk of an accident.
- Make sure the brakes are working correctly before driving the vehicle for the first time.