Overview - Brake Pedal
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Brake Pedal
- There are different versions. Refer to the Parts Information for the allocation.
- The path of the brake pedal must not be shortened by extra floor mats
- Refer to BRAKE PEDAL, DISCONNECTING FROM BRAKE BOOSTER
- Refer to BRAKE PEDAL, ATTACHING TO BRAKE BOOSTER
- Refer to BRAKE PEDAL, REMOVING AND INSTALLING
- Bolt
- 8 Nm
- Holds the mounting pin in place
- Clip
- Replace after removing
- Nut
- 8 Nm
- Mounting Bracket
- For foot pedal assembly
- There are different versions. Refer to the Parts Information for the allocation.
- Refer to MOUNTING BRACKET, REMOVING AND INSTALLING
- Clip
- Replace after removing
- Must be seated completely in the groove on the bearing pin
- Mounting Pin
- For brake pedal
- There are different versions. Refer to the Parts Information for the allocation.
- Do not lubricate
- Secured with the bolt -item 2- OVERVIEW - BRAKE PEDAL => List Item:Bolt
- Bolt
- 20 Nm
- Pedal bracket to steering column
- Pedal Rubber