Drivetrain Control Module -J775-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Equipped on some models: install the rear air duct. Refer to appropriate Servcie Information .
-- Install the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
-- After replacing the control module Drivetrain Control Module -J775-, complete the "Control module, replacing" program using the Vehicle Diagnostic Tool, followed by "Basic setting, complete".
-- Readapt the standard vehicle height. Refer to STANDARD VEHICLE HEIGHT, READAPTING .