Standard Vehicle Height, Initiating And Locking

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Vehicle Diagnostic Tester

Procedure

Determine the correct suspension version. Refer to appropriate Repair Information.

-- If the standard vehicle height is initiated and locked, select the "Standard Vehicle Height, Initiating and Locking". Refer to DIAGNOSTIC ENTRIES .

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.

If the basic setting "0074 - initiate and lock standard vehicle height" has been activated, then basic setting "0074 - Basic setting activate regulation" must be performed.