Air Suspension System, Filling And Bleeding
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Bleeding
-- If the air suspension system is bled, select the "Air Suspension System, Bleeding" program. Refer to DIAGNOSTIC ENTRIES .
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.
Filling
CAUTION:
Risk of destroying the rear air springs due to incorrect handling when filling.
- Guide empty or newly installed air springs on the rear axle during the filling procedure.
-- To fill, proceed in the same way under "Air Suspension System, Filling". Refer to DIAGNOSTIC ENTRIES .