Left Front Parallel Parking Assistance Sensor -G568- /Right Front Parallel Parking Assistance Sensor -G569-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the front wheel housing liners in the front area. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Press both retainers to the side in the direction of -arrows- and at the same time, push the sensor -1- through from the outside toward the inside.
-- Disconnect the connector -2- by sliding the retainer -3- toward the rear and pressing the release down.