Wireless Control Head 1 -E859-, REMOVING AND INSTALLING: Notes

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The Wireless Control Head 1 -E859-, Smart Control (SCON), is located in the rear center armrest, QW5. It is in the mount for the Auxiliary Display Control Head 1 -E857-.

If the Wireless Control Head 1 -E859- is being replaced, the following procedure applies:

-- Connecting and switching on the Vehicle Diagnostic Tester.

-- Switch the ignition on.

-- Select and start the Diagnostic operating mode.

-- Select the Test plan tab.

-- Select the Select individual test button and select the following tree structure consecutively:

Diagnostic-capable systems
00E0 - Auxiliary Display Control Head 1 - E857
00E0 - Auxiliary Display Control Head 1, functions
0722 - Wireless Control Head 1, replacing (E859)

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.