Near Field Communication Antenna, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the center speaker trim in the instrument panel. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .
-- Release the catches -2- for the Near Field Communication Antenna -R269- -1-.
-- Tilt the Near Field Communication Antenna -R269- -1- in the direction of the -arrow- out of the holder in the instrument panel.
-- Release and disconnect the connector -3- from the Near Field Communication Antenna -R269- -1-.
-- Remove the Near Field Communication Antenna -R269-.