Left And Right Bumper Antennas, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release and disconnect the connector -5- on the bumper antenna -1-
-- Remove the nut -2- on the bumper antenna -1-.
-- Remove the bumper antenna -1- from the bracket -3-.
-- If necessary, remove the nuts -4- and then remove the bracket -3- from the body.