Component Location Overview - Electric Drive Power And Control Electronics, AUDI A6/A7
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- High-Voltage Cable
- For the Electrical A/C Compressor -V470-
- For the High-Voltage Heater (PTC) -Z115-
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - HIGH-VOLTAGE CABLES .
- Electric Drive Power and Control Electronics -JX1-
- Removing and Installing. Refer to ELECTRIC DRIVE POWER AND CONTROL ELECTRONICS, REMOVING AND INSTALLING, AUDI A6/A7 .
- High-voltage wiring harness for high-voltage battery
- From the Hybrid Battery Unit -AX1-
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - HIGH-VOLTAGE CABLES .
- Bolt
- Tightening Specification. Refer to ) COMPONENT LOCATION OVERVIEW - HIGH-VOLTAGE CABLES, ELECTRIC DRIVE POWER AND CONTROL ELECTRONICS, HYBRID BATTERY.
- Bolt
- Tightening Specification. Refer to ) COMPONENT LOCATION OVERVIEW - POTENTIAL EQUALIZATION CABLES, AUDI A6/A7.
- Potential Equalization Cable
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - POTENTIAL EQUALIZATION CABLES, AUDI A6/A7 .
- Nut
- 20 Nm
- After installing, coat with Conservation Wax. Refer to the > Parts Information.
- B+ Wire
- Supply line for the Electric Drive Power and Control Electronics -JX1-
- Connector
- For the Electric Drive Power and Control Electronics -JX1-
- Drive Motor High-Voltage Wiring Harness
- To the Electric Drive Motor -V141-
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW - HIGH-VOLTAGE CABLES .
- Bolt
- Tightening Specification. Refer to ) COMPONENT LOCATION OVERVIEW - HIGH-VOLTAGE CABLES, DRIVE MOTOR, ELECTRICAL A/C COMPRESSOR, HIGH-VOLTAGE HEATER.