Check Valve In Refrigerant Line From Valve Block, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- For all the following work, immediately close the open lines and connections with clean plugs from the Engine Bung Set :VAS6122 .
- There are different versions of the check valves (different connections and nominal sizes for the flow). Note the correct allocation. Refer to Parts Information.
-- Remove the Refrigerant Expansion Valve 2 -N637-. Refer to Refrigerant Expansion Valve 2 -N637-, REMOVING AND INSTALLING .
-- Remove the bolts -D- and refrigerant lines -F-.
-- Remove the bolt -D- and base plate -G-.
-- Remove the bolt -A-.
-- Remove the check valve -E- together with the refrigerant line.
-- With it removed, remove the bolt -D- and the refrigerant line from the check valve -E-.