Refrigerant Oil Capacities In Refrigerant Circuits For Refrigerant R134A
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Depending on the time period of production and the engine, the compressor construction type may vary. Refer to the Parts Information.
- Depending on the A/C compressor type, different refrigerant oil capacities may be designated for the refrigerant circuit. Refer to the Parts Information.
- Different refrigerant oils are used depending on the manufacturer of the A/C compressor. Refer to Parts Information.
- Refer to APPROVED REFRIGERANT OILS FOR REFRIGERANT R134A
Refer to FLUID CAPACITY TABLES
| Vehicle Type | Production Period | Total Quantity of Oil in Refrigerant Circuit in cm3 | Quantity of Refrigerant Oil in Replacement Compressor in cm3 | Differing Features of this Refrigerant Circuit |
|---|---|---|---|---|
| A6, A7 | From 10/2017 | 110 + / - 10 | 110 + / - 10 |
|
| 100 + / - 10 | 100 + / - 10 |
|
||
| Audi A6 / Audi A7 TFSIe | From 07/2019 | 220+ / - 10 | 220+ / - 10 |
|
- The replacement A/C compressor is already filled with a specific amount of refrigerant oil (depending on the A/C compressor). This refrigerant oil quantity corresponds to the oil quantity designated for this refrigerant circuit. If the A/C compressor is replaced without the refrigerant circuit needing to be flushed, then the refrigerant oil in the new A/C compressor being installed must match the oil quantity that was removed from the old A/C compressor. Refer to Refrigerant Circuit Components, Replacing .
- A data plate may be attached to the A/C compressor by the manufacturer, indicating the part number and refrigerant oil quantity.