Overview - Front Backrest, Backrest Adjustment Motor
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Adjustment Shaft
- Bolt
- 7.5 Nm
- Backrest Adjustment Motor
- Removing and installing. Refer to Driver Backrest Adjustment Motor -V45- /Front Passenger Backrest Adjustment Motor -V46-, EMOVING AND INSTALLING .
- Connector
- Backrest Frame
- Lock Washer
- Replace after removing
- Push onto the adjustment shaft so that there is still at least 1.0 mm of play