Fuel Level Sensor -G-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

NOTE:

Be careful not to bend the floater arm on the fuel level sensor when inserting.

-- Carefully guide the Fuel Level Sensor -G- through the installation opening in the fuel tank.

-- Insert the Fuel Level Sensor -G- into the mount on the baffle housing and push downward until it engages.

-- Install the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .