Camshaft Adjustment Valve 1 -N205- / Exhaust Camshaft Adjustment Valve 1 -N318-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Audi Q7/Q8:

Remove the Exhaust Camshaft Adjustment Valve 1 -N318-.

All except Audi A8/Q7/Q8:

-- Remove the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .

Audi A4/A5:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the air guide -2-.

Audi A6/A7:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and then remove the air guides -1 and 2-.

Audi Q5:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and air duct -1-.

Continuation for both camshaft adjustment valves:

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors:

1 -

For the Exhaust Camshaft Adjustment Valve 1 -N318-

3 -

For the Camshaft Adjustment Valve 1 -N205-

-- Remove the bolts -arrows- and then remove the camshaft adjustment valve:

2 -

Exhaust Camshaft Adjustment Valve 1 -N318-

4 -

Camshaft Adjustment Valve 1 -N205-