Wheel Bolt Tightening Specifications
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The wheel bolts are different lengths and have ball bearing surfaces depending on the model.
The wheel bolts and wheels will only be secured correctly if the correct wheel bolts are used.
Make sure the correct wheel bolts are installed. Refer to Parts Information.
The ball bearing surfaces of the wheel bolts must be free of grease and clean.
The ball bearing surfaces of the wheel bolts must "not be greased or oiled".
Audi A4
| Model | Tightening Specification |
|---|---|
| RS 4, Type 8D | 140 Nm |
| A4, all types | 120 Nm |
Security
| Model | Tightening Specification |
|---|---|
| A6 (security) | 140 Nm |
| A8 (security) | 140 Nm |