Overview - Sliding Sunroof, A4 Sedan
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Quantity: 2
- 3 Nm
- Sunroof Motor -V1-
- Removing and Installing. Refer to Sunroof Motor -V1-, REMOVING AND INSTALLING, A4 .
- Perform the adaptation after installing. Refer to Sunroof Motor -V1-, PROGRAMMING .
- Sunroof Control Module -J245-
- Removing and Installing. Refer to Sunroof Control Module -J245-, REMOVING AND INSTALLING, A4 .
- Sunroof Frame
- Removing and Installing. Refer to SUNROOF FRAME, REMOVING AND INSTALLING, A4 SEDAN .
- Perform the adaptation after installing. Refer to Sunroof Motor -V1-, PROGRAMMING .
- Foam Seal
- Bonded to the sunroof frame
- Replace after removing
- Sun Shade
- Removing and Installing. Refer to SUN SHADE, REMOVING AND INSTALLING .
- Perform the adaptation after installing. Refer to Sunroof Motor -V1-, PROGRAMMING .
- Boot
- Removing and Installing. Refer to BOOT, REMOVING AND INSTALLING .
- Glass Panel
- Removing and Installing. Refer to GLASS PANEL, REMOVING AND INSTALLING, A4 SEDAN .
- Adjusting. Refer to GLASS PANEL, ADJUSTING, A4 SEDAN .
- Perform the adaptation after installing. Refer to Sunroof Motor -V1-, PROGRAMMING .
- Emergency Opening. Refer to EMERGENCY OPENING .
- Sliding Sunroof Seal
- Removing and Installing. Refer to SUNROOF SEALS, REMOVING AND INSTALLING, A4 SEDAN .
- Perform the adaptation after installing. Refer to Sunroof Motor -V1-, PROGRAMMING .
- Bolt
- Replace after removing
- Self-locking
- Quantity: 6
- 3 Nm
- Rubber Buffer
- Installed on the sun shade
- Bolt
- Replace after removing
- Self-locking
- Quantity: 4
- 1.5 Nm
- Gliding Piece
- For the sun shade
- Removing and Installing. Refer to SUN SHADE, REMOVING AND INSTALLING .
- Perform the adaptation after installing. Refer to Sunroof Motor -V1-, PROGRAMMING .
- Nut
- Quantity: 12
- Tightening sequence. Refer to Installing .
- 8 Nm
- Rubber Buffer